A vehicle owner may need to replace the screw of a license plate at one point or another. The reason is that license plate screws can easily get missing or become worn out with time.
When such a need arises, it is essential to know your vehicle’s right license plate screw size.
The wide variety of license plate screws may get you confused if you don’t have a good knowledge of the type that will fit your vehicle perfectly. Different car brands require different screw types and sizes for their license plate.
Screw manufacturers use different types of materials to make screws. They also make screws of different sizes to meet the need of all car varieties.
For instance, some screws have slotted truss, slotted hex, hex head, truss head, and some others. There are self-tapping screws that fit many vehicles with plastic or nylon screw retainers.
But they do not fit vehicles with threaded metal holes because such vehicle brands recommend a different screw size. So, read on to get all you need to know about license plate screw sizes.
Understanding License Plate Screw Sizes
The standard screw size for most vehicles’ license plates is determined by the manufacturer, but there may be variations in sizes among different manufacturers.
Standard Screw Size For Most Vehicles
The standard license plate screw size for most vehicles is typically 1/4-14-3/4-inch self-tapping screws. This measurement suits the majority of car brands and doesn’t require a pre-drilled hole, which adds to its popularity.
The threading on these screws makes them compatible with vehicles featuring nylon or plastic screw retainers. However, there are exceptions depending on the make and model of your vehicle.
Variations in Screw Sizes by Manufacturer
Different manufacturers may have variations in the screw sizes used for license plates. While the standard size is 1/4-14-3/4 inch self-tapping screws, some brands may use different specifications.
It’s important to check the specific requirements for your vehicle to find the appropriate screw size and ensure a secure fit for your license plate.
Types of Screw For License Plates
License plates are necessary for every car, but they can also be an eyesore. While some people prefer the look of traditional license plates with screws on the side, others like to upgrade and get new types. If you’re not sure what kind of screw would fit your vehicle best, here is a list:
#1. Slim Line.
These screws come in different shapes and sizes, depending on the make and model of your vehicle. They usually come with small heads that don’t protrude much from the plate itself because they have to fit into recessed holes or slots in your bumper.
#2. Sport Line.
These types of screws have large heads that stick out about ¼ inch from where it’s mounted.
You should use them on bumpers that don’t have plastic covers. It is the most common type of screw for new vehicles, so it’s easy to find one online if you need a replacement.
#3. BMW OEM.
If you want something more unique, BMW OEM screws come in different lengths and finishes but tend to cost more than Slim Line or Sport Line screws.
#4. Shadow Line.
Shadow Line screws are the best to use if you have a BMW because they fit perfectly with your car’s design and look like part of it rather than an add-on accessory.
#5. Star Line.
Star Line is another option for BMW owners with star shapes instead of traditional screw heads. These types of license plate fasteners usually come in chrome, black, or satin finishes to match the style of your car.
#6. Flat Line.
The last type is Flat Line which is similar to Slim Line screws but has low-profile heads that sit flush with the license plate itself. They work well on bumpers without plastic covers because they don’t stick out like Sport Line screws.
Types of License Plate Screw Heads
License plate screws can be classified by the shape of their heads. The following are the most common types of heads in the industry.
#1. Pan Head.
This is a very common license plate screw head. It has a rounded head shape and a fairly large diameter. It sits on top of the surface but the top of the head is flat rather than half-round. The flat underside provides a larger surface area for a stronger hold.
The drive slot of a pan head screw is deep, allowing for increased torque. These screws are commonly available with cross-recessed heads.
Slotted and Phillip pan heads have a gently rounded or flat top surface, a flat bearing surface, and cylindrical sides. You can use a Phillips screwdriver to drive this type of screw head.
#2. Button Head.
This type of screw has a low domed-shaped head and a wider bearing surface. Button head screws have a unique finished appearance, which provides a more visually aesthetic look.
They have a fairly large head diameter, allowing you to use a larger drive to exert more torque. The button head design doesn’t have pointed edges, making these screws safer to use.
#3. Hex Head.
Hex head license plate screws have a hexagonal-shaped head. This type of head can be tightened with a socket or wrench.
There are some hex head screws that are fitted with a Phillips or slotted head, allowing you to use a screwdriver instead of a socket or a wrench.
These screws may have a flanged head or full-bearing washer. Socket head screws are more like hex head screws but you will need an internal wrench for tightening.
#4. Flat Head.
This type of screw has either a countersunk or cone-shaped bottom and a flat top. The head can be aligned below or flush the surrounding surface.
Flathead screws are available with different drivers, depending on the size and material. The most common drivers are Phillips, slotted, and socket.
#5. Round Head.
A round head screw has a semi-elliptical top surface along with a flat bearing surface. Roundhead screws are capable of maintaining good connections.
One of their most notable advantages is the broad dome-shaped head. This feature is effective for evenly distributing force, eliminating the need for a washer.
#6. Truss Head.
Truss head screws come equipped with a low rounded top along with a flat bearing surface that has a larger area than a round head screw of the same size. Truss head profile provides a trim finished assembly appearance.
These screws are mostly used in applications where there is limited clearance above the head.
Why is the Correct License Plate Screw Size Important?
Understanding why the correct license plate screw size is important is crucial for every vehicle owner. Using the right screw size is essential for several reasons:
- Preventing License Plate Theft: Properly sized screws make it more difficult for thieves to remove your license plate. The right screw size ensures a secure attachment that can deter theft attempts.
- Avoiding Damage to Your Vehicle: Incorrectly sized screws can strip the holes on your license plate or vehicle, leading to damage. Using the correct screw size prevents unnecessary wear and tear on your license plate and vehicle.
- Complying with Local Regulations: Different regions may have specific regulations regarding license plate screw sizes. Adhering to these regulations is important to avoid fines and ensure compliance with local laws.
By selecting the correct license plate screw size, you can protect your license plate from theft, maintain the integrity of your vehicle, and stay in compliance with local regulations.
Securing Your License Plate: Proper Installation Techniques
Once you’ve determined the correct license plate screw size, it’s crucial to ensure proper installation for a secure and long-lasting attachment. Follow these tips and techniques to securely install your license plate:
- Tighten screws properly: Use a screwdriver or a suitable tool to tighten the screws firmly. Avoid overtightening, as it can damage the license plate or the mounting surface.
- Use washers: Place washers between the screw head and the license plate to distribute the pressure evenly and prevent the plate from bending or cracking.
- Apply Loctite adhesive: For added security, consider applying a small amount of Loctite adhesive to the screw threads. This adhesive helps prevent loosening due to vibrations or external forces.
- Double-check alignment: Before tightening the screws, ensure that the license plate is properly aligned. Adjust it as necessary to maintain a straight and centered position.
- Consider using anti-theft screws: To deter license plate theft, you can use specialized anti-theft screws that require unique tools for removal. These screws provide an extra layer of security and peace of mind.
Remember, properly installing your license plate not only protects it from theft but also ensures the plate remains securely attached to your vehicle, avoiding any potential safety hazards or fines due to non-compliance with local regulations.
With these proper installation techniques, you can have confidence that your license plate is secure and will stay in place, even during challenging road conditions.
Materials for License Plate Screws
When deciding on the right size screw for license plate, the material is simply as crucial as the size itself. Stainless metal is a famous option because of its rust-resistant houses, making sure durability in all weather situations.
Zinc-plated metal is every other affordable preference, offering top corrosion resistance, though it could no longer be as lengthy-lasting in harsh environments.
For light-weight plates or plastic frames, plastic screws may be used, though they’ll now not offer the identical energy.
Aluminum screws offer a balance of lightness and resistance to rust. Choosing the right fabric will make sure your registration code is securely fixed for the long term.
How to Measure Screw Sizes?
Screws are an essential component in any DIY or construction project. They are used to join materials together and come in various sizes and types.
Knowing how to measure screw sizes accurately is crucial for choosing the right screw for your project. In this article, we will provide you with a detailed guide on how to measure screw sizes and the tools required for this task.
Tools Needed to Measure Screw Sizes
1. Screw Gauge – A screw gauge is the most accurate tool for measuring screw sizes. It is a handheld tool that measures the diameter of the screw thread, so you can identify the correct metric or imperial size. Screw gauges are available at most hardware stores and online retailers.
2. Calipers – Calipers are another tool that can be used to measure screw sizes. They are not as accurate as a screw gauge, but they can give you a good estimate of the screw diameter. Calipers are also available at most hardware stores and online retailers.
Step-by-Step Guide on How to Measure Screw Sizes
1. Determine the type of screw – Firstly, you need to identify the type of screw you are measuring. Screws come in different lengths, materials, and shapes, so choosing the right type of screw is essential before you begin measuring.
2. Measure the length of the screw – If you need to measure the length of the screw, use a tape measure or ruler. Place the screw on a flat surface and measure from the top of the screw head to the tip of the screw.
3. Measuring the thread diameter – This is the most critical measurement when it comes to screwing sizes. Place the screw gauge or caliper over the screw thread. If you are using a screw gauge, look for the slot that matches the thread pitch of the screw. This will indicate the diameter of the screw thread. If you are using calipers, measure the distance across the widest part of the thread.
4. Matching the screw size – Once you have measured the screw diameter, you can match it to the appropriate screw size in metric or imperial units. The size of the screw will be indicated by either a numerical value or a letter. For example, a screw gauge measurement of 3.5mm would correspond to a metric screw size of M3.5.
How to Find The Specific Screw Size for Your Make and Model
Different car manufacturers may use different screw sizes, so it’s important to find out which one is suitable for your vehicle.
You can consult the owner’s manual of your car, which often includes information about the recommended screw size. Another option is to contact the manufacturer or dealership directly to inquire about the proper screw dimensions for your license plate.
Consulting the Vehicle’s Owner’s Manual
To determine the appropriate screw size for your license plate, consult the vehicle’s owner’s manual. The owner’s manual will provide specific instructions and recommendations based on your make and model of the vehicle.
It may indicate the standard screw size or mention any variations that you need to be aware of.
Contacting the Manufacturer or Dealership
If you’re unsure about the correct license plate screw size, reach out to the manufacturer or dealership. It is a reliable way to get accurate information.
They will have access to the official specifications and can provide you with the proper screw size for your make and model.
This ensures that you won’t waste time and money on purchasing incorrect screws. Simply reach out to them via phone, email, or through their website, providing them with your vehicle’s details such as make, model, and year.
What size are license plate screws
License plates have their standard screw sizes, which vary according to brand. Original equipment manufacturers make some screws and they are called Original Equipment Manufacturers (OEM) screws. These types of screws are made uniquely for specified vehicle models.
A common size of license plate screw is the one that measures 1/4-14-3/4 inch where the fraction 1/4 represents the screw’s threaded diameter in inches, the middle number 14 shows the screw’s number of threads, while the last fraction 3/4 is the screw’s length in inches.
The table below shows different license plate screw types, their standard sizes, and the car models.
| Screw Type | Standard Sizes | Car Model |
| Slotted Hex Washer Head | M6-1.0 x 16mm | Audi |
| Slotted Truss | 1/4”-20 x 5/8” | Ford |
| Slotted Hex Washer Head | 1/4″-14-5/8” | Ford |
| Slotted Hex Head | 1/4-14-3/4” | Ram Truck |
| Phillips Pan Head | M6-1.0 x 20mm | Honda |
| Phillips Truss Head | M4.8 x 16mm | BMW |
| Slotted Hex Washer Head | #14 1/4 x 3/4” | Nissan |
| Slotted Pan Head | M6- 1.0 x 25mm | Toyota |
| Slotted Truss Head | #14 x 3/4″ | Chevrolet |
| Slotted Hex, Washer Head | #14 1/4″ x 5/8” | Ford |
Factors to Consider When Choosing Screw Sizes
When it comes to choosing the right screw size for license plate installation, there are a few factors that need to be taken into consideration.
These factors include the make and model of the vehicle, the material of the license plate and mounting bracket, and the local regulations and laws governing license plate installation. Let’s explore each of these factors in more detail.
Vehicle Make and Model
Different vehicles have different license plate mounting options. Some vehicles have pre-drilled holes where the license plate can be directly screwed onto the bumper or grille, while others require the use of a mounting bracket.
The mounting bracket may be attached to the front bumper or the rear trunk or hatch. Before purchasing screws, it is important to determine the type of mounting system your vehicle requires.
Material of License Plate and Mounting Bracket
License plates and mounting brackets can be made of various materials, such as plastic, metal, or composite. The material of the license plate and mounting bracket can influence the choice of screw size.
For instance, plastic license plates and brackets are less rigid than metal, which means that they require shorter screws. On the other hand, metal license plates and brackets require longer screws that can penetrate the thicker material without falling out.
Local Regulations and Laws
Different states and countries have their own regulations and laws regarding the installation of license plates.
These regulations can include specifications on the number of license plates required, the location where the plates must be fixed, and the size and type of screws that can be used.
It is important to check the local regulations before buying screws to make sure that the chosen screws comply with the legal requirements.
Typical License Plate Screw Sizes
Take a look at the table below to get an idea of the typical license plate screw sizes that are commonly used in modern cars.
| Screw Type | Typical Sizes |
| 1012SS – Truss Head Phillips | #10 x 1/2 Stainless |
| 12818 – Hex Washer Head with Slots | 1/4 x 3/4 Stainless, Universal |
| 12932 – Pan head with slots | 1/4 x 3/4 GM, Stainless, and Universal |
| 14099 – Truss head with slots | 1/4 x 3/4 Universal zinc-plated |
| 1434 SS – Truss Head Phillips | 1/4 x 3/4 Stainless |
| 1939 – Hex washer with slotted head | 1/4 x 5/8 with 5/8 o.d. Washer, Ford # N800369-S2 |
| 6552 – Hex Slotted Washer Head | 1/4 x 3/4 plated with black zinc, universal |
| 6717 – Truss head with slots | 1/4 x 3/4 GM, Black, and Universal |
| 82-5503 – Washer Head, Slotted Head | 1/4 x 3/4 Zinc Plated Universal |
| 858SS – Pan Head by Phillips | #8 x 5/8 European, stainless, and universal |
| 90-6739 – Truss with slots | 1/4 x 5/8 Zinc Plated-Blunt Point, Universal |
| 903 – Hex head with slot | #12 x 3/4 Zinc Plated, Subaru, and Universal |
License Plate Screw Size By Manufacturer
I’m going to break down license plate screw sizes by manufacturer so you know exactly what you need to buy.
Keep in mind that some manufacturers may use different license place screw sizes. It’s important to research the screw size for your model to be 100% sure.
#1. Audi License Plate Screw Size.
For Audi license plate screws, you need stainless steel screws with a pan head style. This option comes in two lengths. They are available in standard size for direct installation.
Also available is the extended size to screw the license plate and plate frame together. The screw measures 0.50″ x 0.35″ x 0.50″, with extended screws having an extra 0.15″ thread length. They can be screwed in by a medium-sized Philips head screwdriver.
#2. BMW License Plate Screw Size.
BMW, another German manufacturer, uses license plate screws that are very like Audi’s. They use 316 stainless steel screws for the license plate.
They measure 0.39″ x 0.39″ x 0.19″, and come in standard and extended lengths to accommodate a plate frame. The thread length in metric is 10mm for normal and 16mm for the extended screw.
#3. Chevrolet License Plate Screw Size.
Chevrolet license plates use the standard 1/4″ x 14 x 3/4″ slotted hex washer head screws made out of stainless steel.
The hex head allows you to use a flathead screwdriver or a small 3/8″ drive socket. These screws fit most domestic vehicles and they’ll fit most Chevrolet cars. These screws are intended for nylon/plastic retainer, not metal threaded holes.
#4. Chrysler License Plate Screw Size.
Chrysler license plate screws are made out of stainless steel and measure 13.8mm x 22mm x 6.3mm.
Converted to imperial units, the screw has a 0.54″ head, 0.25″ screw diameter, and 0.86″ length of thread. Three different variants of the screws are available. The C2 size is the correct choice for Chrysler.
#5. Ford License Plate Screw Size.
For Ford license plate screws you’ll need 1/4″ x 3/4″ screws with a 3/8″ hex slotted head. They need to accept a flathead screwdriver or a 3/8″ drive socket.
They are compatible with plastic and nylon retainers. These screws are available in stainless steel, black zinc, or chrome color.
#6. Dodge License Plate Screw Size.
I’ve found a great kit for Dodge vehicles. It includes zinc-plated, stainless steel screws, foam pads, washers, screw inserts, and screw covers.
The screws are classic 1/4″ diameter x 3/4″ length with a 3/8″ slotted hex head. You tighten it with a socket or a flathead screwdriver.
#7. GMC License Plate Screw Size.
GMC license plates accept classic hex head screws. This black oxidized kit looks much better and fits on most vehicles thanks to the universal 0.75″ x 0.25″ dimensions.
Made out of 18-8 stainless steel, these screws should not rust or deteriorate in any way. Which is very important for a metal piece exposed to the elements.
#8. Honda License Plate Screw Size.
Honda license plates use M6 metric-sized screws so this set of 12 screws should do the trick. The front license plate screws are self-tapping, while the rear comes in two sizes. The stainless steel construction comes with a lifetime warranty, which is a huge plus.
#9. Hyundai License Plate Screw Size.
Hyundai uses smaller license plate screws than other manufacturers. The rear plate screws are 0.23″ in diameter and have a 0.46″ head and a 0.64″ long thread.
They’re made out of standard 316 stainless steel and will fit most Hyundai vehicles. The front license plate screws need a socket or a flathead screwdriver. The rear screws need a Phillips head.
#10. Lexus License Plate Screw Size.
Lexus does things a bit differently and uses 0.50″ x 0.55″ x 0.50″ screws with a fine thread. Other than that, they’re standard 316 stainless steel screws that can be screwed in by a small-medium size Phillips head screwdriver.
#11. Mercedes-Benz License Plate Screw Size.
Mercedes-Benz utilizes pan-head stainless steel screws with a Phillips head screwdriver cutout. The package comes with four 5mm screws and four 6mm screws to maximize the number of Mercedes-Benz vehicles it can be used with.
The length of the thread is 16mm, or 0.63″, which is the extended length that can fit a license plate holder.
#12. Mazda License Plate Screw Size.
This kit is great for front and rear Mazda plates. The self-tapping screws are for the front plate, while the four screws with finer thread fit in the back. The screws are compatible with the license plate frames and almost every Mazda model.
The manufacturer hasn’t specified the exact dimensions of the screws, but I would assume they’re 5mm in diameter with 12-16mm thread length.
#13. Nissan License Plate Screw Size.
These screws for Nissan vehicles come in two variants – 1/4″ standard & extended, so you can either attach the plate directly or use a license plate holder. They’re made out of stainless steel and shouldn’t rust under harsh weather conditions.
#14. Tesla License Plate Screw Size.
Tesla license plate screws are usually 5-6mm long. The rear license plate screws are M5-0.8×6. The screws are stainless steel, require a Phillips screwdriver and have a pan head style.
#15. Toyota License Plate Screw Size.
If you’re driving a Toyota, you’ll need 0.50″ x 0.75″ x 0.50″ screws to get the license plate secured. These 316 stainless steel screws will do the job, and can be installed with a Phillips head screwdriver.
Keep in mind that these are extended screws, meaning they’re supposed to be installed with the license plate holder. If you’re installing the plate directly, consider getting the 0.65″ long variant.
The Process to Remove Rusted License Plate Screws
Hammering
Using a hammer carefully, hammer around the screw. Rust can fuse things together over time. Hitting the screw gently can help move the screw.
Only do this if you are confident you will not damage the car or plate. Next, get your screwdriver and undo the screw. Repeat with other stubborn screws.
Lubrication
Spray some WD-40 around the screw and try to work it with the above method to get the lube on the inside. Lube that is specifically made for this job might work better than using WD-40 if you have extra stubborn rusted screws.
Once you have sprayed the screw with the oil, let it sit for a few minutes, then try to get it undone again. If nothing happens, spray again and let it sit for half an hour. Then, try with some elbow grease, and the screw should come loose.
Impact Wrench for Stubborn Screw
An impact wrench is like a drill and uses a rotational force that can pull a screw out. It saves the quick power for when the screw is giving resistance. These tools are not always best for this job as they are more suited for long screws.
However, if other methods have failed, this might be an option to try. If you have trouble using a hammer, these might work for you as they are a lot lighter and easier to handle.
Using Vinegar to Remove Rust From Screws
If you have rusted screws you want to keep, you can try the vinegar method to remove most of the rust. Using distilled white vinegar, pour some into a cup and soak the screws overnight.
Now remove the screws and use a toothbrush to give them a good scrub, and the rust should come away. Rinse clean with fresh water and dry.
What’s the Best Place to Buy License Plate Screws?
There are many options for purchasing license plate screws. You have the choice of automotive stores, car dealerships, or ordering online. All offer a variety of screws and bolts designed for license plates.
If you need screws for your car’s license plate, you can visit a car dealership or walk into an automotive store. Let them know the brand and model of your car so they can provide you with the right size screws for your license plate.
You can always explore online stores for license plate screws. Many online retailers offer standard screws that fit most vehicles. Ordering online is convenient, and you can expect to get your screws fast. You can usually get the lowest prices online as well.
If you’re not a fan of Amazon, there are several cheap auto part stores that probably have what you need. Here is a short list of options:
- Rock Auto – Rockauto.com is an online store that sells auto parts and body parts from over 300 manufacturers, including license plate screws. You can find parts for any vehicle at warehouse prices. Rockauto.com also offers gifts, decals, and t-shirts.
- Parts Geek – Partsgeek.com is an online store that sells discount auto parts and accessories for various vehicles and brands. They have a variety of license plate screws. You can find millions of high-quality OEM, aftermarket, refurbished, and rebuilt parts from trusted manufacturers and suppliers online. Partsgeek.com also offers customer service and fast shipping.
- Car Parts Discount – Carpartsdiscount.com is an online store that sells new and remanufactured auto parts and accessories at low prices. They have a huge selection of license plate screws as well. You can find OEM and aftermarket parts for various vehicles and brands. Carpartsdiscount.com also offers fast shipping and customer service.
- Auto Shack – Autoshack.com is an online store that sells discount auto parts and accessories for various vehicles and brands. You can find aftermarket replacement parts for brakes, suspension, cooling, exhaust, and more. They have license plate screws for most top brands. Autoshack.com also offers customer service and fast shipping.
- Car Parts – Carparts.com is an online store that sells high-quality auto parts and accessories at low prices. You can find replacement parts and performance upgrades for various vehicles and brands. Among their thousands of products are a big selection of license plate screws. Carparts.com also offers a lifetime replacement guarantee and fast shipping.
How to Replace License Plate Screws
To some people, the thought of replacing their license plate screws sounds like a tedious task, but it is quite easy when you have the right knowledge. A license plate thumb helps you to screw in your license plates, and you can buy it from a dealer.
However, the important tool you need to make available before beginning to replace your license plate screws is a screwdriver that will enable you to unscrew the previous ones and screw in the new ones. It could be a Phillips head or a flathead screwdriver.
The steps below will guide you through replacing the screws of the license plate in your front or rear bumpers.
- Begin with the rear license plate.
- Using a Phillips or flathead screwdriver, unscrew the two old license plate screws. The license plate should have two screws above its edge.
- Detach the license plate and its frame and keep them aside.
- Remove the dirt and debris you find around the holes.
- Position the license plate and its frame from where you removed them.
- Place the screws in the holes and begin to screw in the new screws on the plate and the frame with the help of a screwdriver until they have become firm.
- Pull the plate gently to ensure they are secure,
- Then, move to the front license place and repeat the process of unscrewing the old screws and replacing them with new ones. That’s how easy it is to replace license plate screws.
FAQs.
Many vehicle owners ask lots of questions concerning vehicle license plates. Here are some of the questions and our responses to them.
Q: What kind of screwdriver do I need to take off a license plate?
Usually, you’ll need either a Phillips head screwdriver or a flathead screwdriver to take off a license plate. Generally, a flathead screwdriver works for unscrewing most screws that hold a license plate because of its single blade.
But some types of screws will easily come off when you use a Phillips head screwdriver because it can apply more twisting than a flathead screwdriver.
However, the flathead is universal and should help you take off a license plate even if you have to apply more twisting pressure.
Q: Does Lowes have license plate screws?
Yes, Lowes has various license plate screws. You’ll find license plate screws of different styles, such as hex washers, truss slotted, hex heads, and so on. Ensure to ask questions to get the right screw size that will fit your vehicle’s license plate securely.
Q: How do you put a front license plate on without drilling holes?
You can put a front license plate on without drilling holes by purchasing a no-holes license plate bracket kit from car manufacturers. You can attach it by taking the following steps:
- Use a screwdriver to remove the cap and see the tow hook point for mounting.
- Fix the no-hole adapter bolt to the tow hook. You do this by placing the bolt of the no-hole adapter to the tow hook and tightening it using the wrench that comes with it.
- Fix the bracket of the license plate to the bolt and tighten the bracket using the lock washer.
- Place the plate where you want it to be on your bumper and fix the height adjustment bracket of the optional license plate to the bracket you fixed earlier. You do this with the washers and lock nuts that come with the kit.
- Then, fix your license plate to the bracket with the help of the nuts, screws, and other tools in the installation kit.
- You can also see this video for a better understanding.
Q: How do you fit number plates without screws?
You can fit number plates without screws by using heavy-duty adhesive tapes. You may follow these steps to achieve it:
- Remove the existing number plate by taking out the plastic screw covers and unscrewing the number plate.
- Ensure that your car and the back of the plate are both clean and dry.
- Bring out the adhesive tape and cut out two long strips of the loop and the hook. Their length should be the same as the number plate.
- Neatly stick a strip to your car and stick the other strip to the back of your number plate.
- Then, stick the number plate to your car and press it down for about 30 seconds to ensure a firm hold. Your car number plate is now ready without screws.
Q: Will double-sided tape hold a license plate?
Yes, the double-sided tape can hold your license plate. The important thing is to take some time to clean off dirt and grease from the back of your license plate and where you’ll place it.
However, it may not be the best option as some users have complained of their license plate coming off unexpectedly in the middle of the road. It might also be very difficult to remove the number plates to place them on another car.
Final Words
Knowing the size of your license plate screw is necessary as it’ll help you purchase the right one when there is a need. The standard license plate screw size for many vehicles is 1/4-14-3/4-inch self-tapping screws that especially fit vehicles with plastic or nylon screw retainers.
However, even if your vehicle comes with threaded metal holes and you are not sure of the right license plate screw you need, this guide will help you know various license plate screw sizes used by different vehicle models, including yours.